The main goal with the PCB was to reduce my frustration with offboard wiring! So for this i used smaller board mounted pots and input/output/9v/GND pads that could be connected to a separate 3PDT stomp switch board. I bought some ribbon cable to use to make it look a little tidier than 4 separate wires, and I have to say that I am rather pleased with the ease of installation and how much nicer it looks on the inside.
In addition to this I wanted to give my pedal a little something extra with the presentation on the outside, so I used some contrasting hardware colors, as well as screenprinted a lion logo on the side. The screenprint on the side isn't my best idea, but somewhat of an idea of the direction I'd like to head with my designs so its not just good looking on the top of the pedal, but more so that all surfaces will have something interesting going on with them.
One last thing I'm thinking of doing with this is trimming some of the plastic from the inside of the grey knobs so that theys it a little bit lower, right now the height of those knobs and the empty space below them is bothering me a bit.
Here is the schematic for those of you interested in breadboarding this guy. The sound may not be for everyone but I dig it so far :)
If you breadboard it, please let me know what you think, or if you see any design issues which would improve the performance of the pedal please let me know. I'd really appreciate any feedback.
